Supero X7DCT-3, Руководство пользователя

Страница: 62 / 93

4-2
X7DCT-L/X7DCT-3/X7DCT-IBX/X7DCT-3IBX User's Manual
4-2 Running Setup
Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choosing the ap-
propriate text from the main BIOS Setup screen. All displayed text is described in
this section although the screen display is often all you need to understand how to
set the options as shown on the following page.
When you fi rst power on the computer, the Phoenix BIOS Setup utility is immedi-
ately activated.
While the BIOS is in control, the Setup program can be activated in one of two
ways:
By pressing <Delete> immediately after turning the system on, or 1.
When the message shown below appears briefl y at the bottom of the screen 2.
during the POST (Power On Self-Test), press the <Delete> key to activate the
main Setup menu:
Press the <Delete> key to enter Setup
4-3 Main BIOS Setup
All main Setup options are described in this section. The main BIOS Setup screen
is displayed below.
Use the Up/Down arrow keys to move between the different settings in each menu.
Use the Left/Right arrow keys to change the options for each setting.
Press the <Esc> key to exit the CMOS Setup Menu. The next section describes in
detail how to navigate through the menus.
Items that use submenus are indicated with the
X
icon. With the item highlighted,
press the <Enter> key to access the submenu.