Supero X6DAL-XTG, Руководство пользователя

Страница: 19 / 126

Chapter 1: Introduction
1-13
Introduction
you want to turn off the power, just depress and hold the power button for
4 seconds. This option can be set in the Power section of the BIOS Setup
routine.
External Modem Ring-On (WOR)
Wake-up events can be triggered by a device such as the external modem
ringing when the system is in the SoftOff state. Note that external modem
ring-on can only be used with an ATX 2.01 (or above) compliant power
supply.
1-6 Power Supply
As with all computer products, a stable power source is necessary for
proper and reliable operation. It is even more important for processors that
have high CPU clock rates.
The SUPER X6DAL-XTG accommodates ATX power supplies. Although
most power supplies generally meet the specifications required by the CPU,
some are inadequate. You should use one that will supply at least 400W of
power. In addition, a +12V, 8-pin CPU power supply and a +12V, 4-pin
Aux. power supply are also required for high-load configurations. Also
your power supply must supply 1.5A for the Ethernet ports.
NOTE: In addition to the 24-pin main power, a 12V 8-pin power con-
nector (PW2) is required to support Intel Xeon CPUs, and a 12V 4-
pin power connector (Aux. PWR) is also required for system power
consumption. Failure to provide this extra power will result in
instability of the CPU after only a few minutes of operation. See
Section 2-5 for details on connecting the power supply.
It is strongly recommended that you use a high quality power supply that
meets ATX power supply Specification 2.02 or above. It must also be SSI
compliant (info at http://www.ssiforum.org/). Additionally, in areas where
noisy power transmission is present, you may choose to install a line filter
to shield the computer from noise. It is recommended that you also install a
power surge protector to help avoid problems caused by power surges.