Supero X10SLE-DF, Руководство пользователя

Страница: 66 / 95

4-12
X10SLE-DF User’s Manual
AHCI CD/DVD Boot Timeout
Use this feature to set the time-out value for the BIOS to detect the AHCI CD/DVD boot
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35 .

PCIe Configuration
This item displays the information of the (graphics) device installed in a PCI-E
slot.
Run-time C7 Allowed
Select Enabled for Run-time C7 support, which will allow the CPU to enter the
deep-sleep state while the system is in operation to reduce power consumption.
(
Note
: Please be sure to restore the default settings and save appropriate end-
point settings for all components associated to this feature
before
you enable
this feature.) The options are Enabled and Disabled.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is
not compliant with the PCI-E standards. The options are Enabled and
Disabled .
Program PCI-E ASPM After OpROM
PCI-E ASPM, the Active-State Power Management for PCI-Express slots, is a
power-management protocol used to manage power consumption of serial-link
devices installed on PCI-Exp slots during a prolonged off-peak time. If this item
is set to Enabled, PCI-E ASMP will be programmed after the OpROM. If this item
is set to Disabled, the PCI-E ASPM will be programmed before the OpROM. The
options are
Enabled and Disabled.
DMI Link ASPM Control
Use this item to configure the ASPM (Active State Power Management) settings
for the devices/components connected to the DMI Link on the System Agent side.
The options are Disabled, L0s, L1, and
L0sL1 .
PCH DMI Link ASPM Control
Select Enabled to support ASPM (Active-State Power Management) for the DMI
Links in the PCH chip. The options are Disabled and
Enabled .

Memory Configuration
This submenu displays the information on the memory modules installed on the
motherboard.
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
Memory Voltage
Staggered Spin Up
Set this item to Enabled to enable Staggered Spin-up support. The options are Enabled
and
Disabled .
Hot Plug
Set this item to Enabled to enable hot-plugging. The options are Enabled and Disabled .