Supero X10DRG-Q, Руководство пользователя

Страница: 35 / 123

Chapter 2: Installation
2-11
Installing a Passive CPU Heatsink
1. Do not apply any thermal grease to the heatsink or the CPU die -- the re-
quired amount has already been applied.
2. Place the heatsink on top of the CPU so that the four mounting holes are
aligned with those on the Motherboard and the Heatsink Bracket underneath.
3. Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug
(-do not over-tighten the screws to avoid possible damage to the CPU.)
4. Finish the installation by fully tightening all four screws.
OPEN 1st
Screw#1
Screw#2
Mounting Holes
Note:
For optimized airflow, please follow your chasis airflow direction
to properly install the heatsink. Graphics included in this manual are for
reference only. They may look different from the components installed in
your system.
Direction of Airflow