Supero X10DRG-Q, Руководство пользователя

Страница: 16 / 123

1-6
X10DRG-Q Motherboard User’s Manual
SP1 Internal buzzer/speaker
(I-)SATA 0-3 Intel® SATA 3.0 connectors (0-3) from Intel® PCH
(I-)SATA 4/5 Intel® SATA SuperDOM connectors (I-SATA4/5) from
Intel® PCH
(S)-SATA0-3 SATA connectors (0-3) from Intel® SCU
I-SGPIO1/2 Serial_Link General-Purpose I/O (SGPIO) headers for I-
SATA connections (I-SGPIO1 for I-SATA0-3, I-SGPIO2 for
I-SATA4/5)
S-SGPIO Serial_Link General-Purpose I/O (SGPIO) headers for S-
SATA connections (S-SATA0-3) supported by Intel® SCU
(CPU1) SLOT2/4 PCI-Exp. 3.0 x16 Slot2/Slot4 supported by CPU1
(CPU2) SLOT6/8 PCI-Exp. 3.0 x16 Slot6/Slot8 supported by CPU2
(PCH) SLOT9 PCI-Exp. 2.0 x4 in x8 slot with TBT support (from Intel PCH)
(See the note below for Thunderbolt AOC support)
(CPU1) SLOT10 PCI-Exp. 3.0 x8 in x16 slot supported by CPU1
(CPU2) SLOT11 PCI-Exp. 3.0 x8 slot supported by CPU2
(BP) USB 0/1 (2.0) Back panel USB 2.0 ports 0/1
(BP) USB 4/5 (3.0) Back panel USB 3.0 ports 4/5
(FP) USB 2/3 (2.0) USB 2.0 connections 2/3 header for front access
(FP) USB 6 (3.0) Type A USB 3.0 connector 6 for front access
(FP) USB 7/8 (3.0) USB 3.0 connections 7/8 header for front access
VGA Backpanel VGA port
X10DRG-Q LED Indicators
LED Description State Status
LED1 Rear UID LED Blue: On Unit Identified
LED2 Onboard PWR LED On System Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
Warning : To avoid damaging your motherboard and components, please use a
power supply that supports a 24-pin, two 8-pin and and one 4-pin power connectors.
Be sure to connect the 24-pin and the 8-pin power connectors to your power supply
for adequate power delivery to your system. The 4-pin power connector is optional;
however, Supermicro recommends that this connector also be plugged in for optimal
power delivery.
Note : This motherboard supports the latest Thunderbolt technology. For
Thunderbolt support, install the Thunderbolt add-on card on PCH SLOT9
and connect the GPIO cable from the Thunderbolt add-on card to the GPIO
header JTBT1 on the motherboard for TBT hot-plug support.