Supero SuperWorkstation 7046A-HR+, Руководство пользователя

Страница: 94 / 112

7-22
S
uper
W
orkstation 7046A-HR+/7046A-HR+F User's Manual
X
Set LAN Con fi guration
Set this feature to con fi gure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number - Enter the channel number for the SET LAN Con fi g com-
mand. This is initially set to [01] . Press "+" or "-" on your keyboard to change
the Channel Number.
Channel Number Status - This feature returns the channel status for the
Channel Number selected above: "Channel Number is OK" or "Wrong Channel
Number".
IP Address Source
Select the source of this machine's IP address. If Static is selected, you will need
to know and enter manually the IP address of this machine below. If DHCP is
selected, the BIOS will search for a DHCP (Dynamic Host Con
fi guration Protocol)
server in the network it is attached to, and request the next available IP address.
The options are
DHCP and Static.
The following items are assigned IP addresses automatically if DHCP is selected
under IP Address Source above:
IP Address
Enter the IP address for this machine. This should be in decimal and in dotted
quad form (i.e., 192.168.10.253). The value of each three-digit number separated
by dots should not exceed 255 as shown in the screen below.
Subnet Mask
Subnet masks tell the network which subnet this machine belongs to. The value
of each three-digit number separated by dots should not exceed 255.
Gateway Address
This is the IP address of the gateway in the network. This is usually a router.
Mac Address
The BIOS will automatically enter the Mac address of this machine; however it may
be over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~
9, A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).
X
SET PEF Con fi guration
PEF Support
Select Enabled to enable the function of Platform Event Filter (PEF) which will inter-
pret BMC events and perform actions based on pre-determined settings or events
and performs actions based on pre-determined settings or 'traps' under IPMI 1.5