Supero SuperServer 6123L-8R, Руководство пользователя

Страница: 21 / 105

2-3
Chapter 2: Server Installation
2-4 Installing the Server into a Rack
This section provides information on installing the SuperServer 6123L-8R/6123L-
iR into a rack unit with the rack rails provided. If the 6123L-8R/6123L-iR has
already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions
that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
You should have received two rack rail assemblies with the SuperServer 6123L-
8R/6123L-iR. Each of these assemblies consists of two sections: an inner fixed
chassis rail that secures to the 6123L-8R/6123L-iR and an outer fixed rack rail
that secures directly to the rack itself (see Figure 2-1). A pair of short brackets
to be used on the front side of the outer rails are also included.
Installing the Inner Rails
First, locate the right inner rail (the rail that will be used on the right side of the
chassis when you face the front of the chassis). Push the locking tab to release
the inner rail, then pull the inner rail completely out of the assembly. Align the
five square holes on the right inner rail against the protruding buttons on the right
side of the chassis. Place the rail on the chassis and then pull it forward to move
the buttons into the small end of the elongated chassis holes. Attach the rail
to the chassis with two M4 x 4 mm roundhead screws (see Figure 2-2). Repeat
these steps to install the left inner rail to the left side of the chassis.
Figure 2-1. Identifying the Rail Sections
Outer rail (secures directly to the rack)
Inner rail (secures to the chassis)
Locking Tab