Supero SUPERSERVER 6027R-N3RF, Руководство пользователя

Страница: 78 / 130

5-28
SUPERSERVER
6027R-N3RF/WRF USER'S MANUAL
5-11 SATA/SAS Drive Connections
UID LED
Status
Color/State Status
Blue: On Unit Identifi ed
Blue: On Unit Identifi ed
Note: For more information on SATA HostRAID configuration, please
refer to the Intel SATA HostRAID User's Guide posted on our Website @
http://www.supermicro.com .
SATA/SCU
Pin Defi nitions
Pin# Defi nition
1 Ground
2 TX_P
3 TX_N
4 Ground
5 RX_N
6 RX_P
7 Ground
SATA/SCU Ports
There are six Serial ATA ports
(I-SATA0~I-SATA 5) located on the
motherboard, including four SATA2
ports and two SATA3 ports. There are
also eight SCU/SAS ports (0~3, 4~7)
located on the X9DRW-3F, and four
SCU ports (SCU 0~3) located on the
X9DRW-iF. These ports provide serial-
link signal connections, which are
faster than the connections of Parallel
ATA. See the table on the right for pin
defi nitions.
Onboard Power LED
An Onboard Power LED is located
at LE1 on the motherboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the tables
at right for more information.
Onboard PWR LED Indicator
LED Settings (LE1)
LED Color Defi nition
Off System Off (PWR cable not
connected)
Green System On
Green:
Flashing
Quickly ACPI S1 State
Rear UID LED
The rear UID LED is located at LED3
on the rear of the motherboard. This
LED is used in conjunction with the
rear UID switch to provide easy
identifi cation of a system that might be
in need of service. Refer to UID Switch
on Page 2-17 for more information.