Supero SUPERSERVER 6015TC-LFT, Руководство пользователя

Страница: 80 / 96

7-16
S
UPER
S
ERVER 6015TC-LFT User's Manual
X
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. The options are COM A, COM B and Dis-
abled .
Note: The default setting for the X7DCT-LF is set to Onboard IPMI when the BMC
Controller is installed on the motherboard and the item-Exit Saving Changes in the
Exit menu has been selected.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600, 19.2K , 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to set console redirection type. The options are VT100,
VT100/8bit, PC-ANSI/7bit, PC ANSI , VT100+, VT-UTF8 and ASCII.
Flow Control
This item allows you to select the fl ow control option for the console. The options
are: None, XON/XOFF, and CTS/RTS .
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct or Via Modem.
Continue CR after POST
Select on to continue with console redirection after the POST routine. The options
are On and Off .
Note: The default setting for the X7DCT-LF is set to On when the BMC Controller
is installed on the motherboard and the item-Exit Saving Changes in the Exit menu
has been selected.