Supero SUPERSERVER 6015TC-LFT, Руководство пользователя

Страница: 78 / 96

7-14
S
UPER
S
ERVER 6015TC-LFT User's Manual
X
I/O Device Confi guration
Access the submenu to make changes to the following settings.
Serial Port A
This setting allows the user to decide if Serial Port A should be controlled by the
BIOS or by the OS. The options are Enabled (user defi ned), Disabled, and Auto
(BIOS- or OS- controlled).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port A. The options
are 3F8 , 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port A. The
options are IRQ3 and IRQ4 .
X
DMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display to inform you of the event log validity. It is not a setting.
Event Log Capacity
This is a display to inform you of the event log capacity. It is not a setting.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Event Logging
This setting allows you to Enable or Disable event logging.
ECC Event Logging
This setting allows you to Enable or Disable ECC event logging.
DCA Delay Clocks (Available when supported by the CPU)
This feature allows the user to set the clock delay setting from snoop to prefetch
for Direct Cache Access. Select a setting from 8 (bus cycles) to 120 (bus cycles)
(in 8-cycle increment). The default setting is 32 (bus cycles) .