Supero SUPERSERVER 5017A-EF, Руководство пользователя

Страница: 84 / 102

7-12
S
UPER
S
ERVER 5017A-EF User's Manual

Trusted Computing
TPM Support
Select Enable to activate BIOS support for trusted platforms (TPM 1.1/1.2) and al-
low the BIOS to automatically download the drivers needed to provide support for
the platforms speci
fi ed. The options are Disable and
Enable
.
TPM State
This feature changes the TPM State. The options are Disabled and
Enabled
. Note:
The system will restart to change the TPM State.
Pending operation
Displays any TPM-related operation by the system.
Pending operation
The following are informational status messages that indicate the current TPM State:
TPM Enabled Status
TPM Active Status
TPM Owner Status

Hardware Health Confi guration
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speed of the
onboard fans. Select "Full Speed" to allow the onboard fans to run at full speed
(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting
is recommended for special system con
fi guration or debugging. Select "Standard"
for the onboard fans to run at 20% of the Initial PWM Cycle in order to balance the
needs between system cooling and power saving. In Standard mode, the fan speed
will increase up to full speed, depending on motherboard system temperature. This
setting is recommended for regular systems with normal hardware con
fi gurations.
The options are Full Speed (@100% of PWM Cycle), and
Standard
(@20-100%
linear change of PWM Cycle).
CPU, System, Peripheral Temperature
This feature displays the system and peripheral device temperatures, as detected
by the motherboard sensors.