Supero SUPERSERVER 5017A-EF, Руководство пользователя

Страница: 55 / 102

Chapter 5: Advanced Motherboard Setup
5-13
5-9 Jumper Settings
Explanation of Jumpers
To modify the operation of the mother-
board, jumpers can be used to choose
between optional settings. Jumpers
create shorts between two pins to
change the function of the connector.
Pin 1 is identi
fi ed with a square solder
pad on the printed circuit board. See
the motherboard layout pages for
jumper locations.
Note:
On a two-pin jumper, "Closed"
means the jumper is on both pins and
"Open" means the jumper is either on
only one pin or completely removed.
Connector
Pins
Jumper
Setting
3 2 1
3 2 1
CMOS Clear
JBT1 is used to clear CMOS (which will also clear any passwords). Instead of pins,
this jumper consists of contact pads to prevent accidentally clearing the contents
of CMOS.
To clear CMOS,
1. First power down the system and unplug the power cord(s).
2. With the power disconnected, short the CMOS pads with a metal object such
as a small screwdriver.
3. Remove the screwdriver (or shorting device).
4. Reconnect the power cord(s) and power on the system.
Note: Do not use the PW_ON connector to clear CMOS.
VGA Enable/Disable
Jumper Settings (JPG1)
Both Jumpers De fi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
VGA Enable (JPG1)
JPG1 allows you to enable or disable the
onboard VGA port. The default position is
on pins 1 and 2 to enable VGA. See the
table on the right for jumper settings.