Supero SUPERSERVER 5017A-EF, Руководство пользователя

Страница: 46 / 102

5-4
S
UPER
S
ERVER 5017A-EF User's Manual
5-4 Onboard Processor and Heatsink
The X9SBAA-F features an embedded Intel® Atom
TM
SoC S1260 processor.
5-5 Installing Memory
Caution!
Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
Note
: Check the Supermicro website for a list of memory modules that have been
validated with the X9SBAA-F motherboard.
How to Install SO DIMMs
1. Insert the SO DIMM into the memory slot. Pay attention to the notch along
the bottom of the module to prevent incorrect installation.
2. With the SO DIMM module positioned correctly, push until it snaps into place.
See instructions on the next page.
Memory Support
The X9SBAA-F motherboard supports up to 8GB of unbuffered ECC DDR3-1333
memory.
5-6 Adding PCI Add-On Cards
The 5017A-EF can accommodate a single riser card to support a 32-bit 5V PCI
add-on card
Installing an Add-on Card
1. Begin by removing the shield for the PCI slot where the riser card is located.
2. Fully seat the card into the riser card, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.