Supero SUPERSERVER 5017A-EF, Руководство пользователя

Страница: 52 / 102

5-10
S
UPER
S
ERVER 5017A-EF User's Manual
System Management Bus (JIPMB1
)
A System Management Bus header for
the IPMI slot is located at IPMB. Connect
the appropriate cable here to use the
IPMB I2C connection on your system.
System Management
Bus
Pin# De fi nition
1 Clock
2 Ground
3 Data
4 No Connection
Chassis Intrusion (JL1)
A Chassis Intrusion header is located
at JL1 on the motherboard. Attach the
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chassis Intrusion
Pin Defi nitions (JL1)
Pin# De fi nition
1 Intrusion Input
2 Ground
Power Supply I 2 C (JPI2C1)
The Power Supply I2C Connector,
located at JPI2C1 monitors the status
of the power supply, fan and system
temperature. See the table on the right
for pin de
fi nitions.
PWR Supply I2C
Pin Defi nitions
Pin# De fi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 3.3V
SATA DOM Power (JSD1)
The SATA DOM Power on JSD1 is used
to supply power to SATA Disk-on-Module
(DOM) solid-state storage devices.
SATA DOM Power
Pin Defi nitions
Pin# De fi nition
1 +5V
2 Ground
3 Ground
Overheat/Fan Fail LED (JOH1)
The JOH1 header is used to connect an
LED to provide warnings of chassis over-
heat. This LED will also blink to indicate
a fan failure. Refer to the table on right
for pin de
fi nitions.
Overheat LED
Pin Defi nitions
Pin# De fi nition
1 5vDC
2 OH Active
OH/Fan Fail LED
Status Message
State Message
Solid Overheat
Blinking Fan Fail