Supero SuperServer 5013C-MT, Руководство пользователя

Страница: 92 / 98

C-2
S
UPER
S
ERVER 5013C-MT User's Manual
Primary Master(=PM) Yes Yes No No No No
Primary Slave(=PS) Yes No Yes No No No
Secondary Master(=SM) Yes No No Yes No No
Secondary Slave(=SS) Yes No No No Yes No
SATA Port0 No SM SM PM PM PM
SATA Port1 No SS SS PS PS PS
*Note: (No=Not Present, Yes=Present) Also, if Logical Primary is
selected, the IDE channels are no longer available.
Enhanced Mode
In this mode, system BIOS will automatically search for all available IRQs for HDD
use. For newer operating systems that support Enhanced Mode (such as
WindowsXP, Windows2000 and Windows2003), you can set SATA and PATA to the
Enhanced Mode. (These newer operating systems can accommodate both En-
hanced and Combined Modes and support up to six ATA devices.)
Please refer to "Advanced Chipset Control" under the "Advanced" setup section in
BIOS to select Combined Mode or Enhanced Mode.
Non-Combined Mode: SATA only, with a maximum of two devices supported.
Combined Mode: SATA and PATA devices, with support for two devices of each for
a total of four devices maximum. For IDE(PATA)/SATA configurations, please refer
to the table below.