Supero SUPERSERVER 1027TR-TF, Руководство пользователя

Страница: 26 / 130

2-10
SUPERSERVER 1027TR-TF/1027TR-TFF/1027TR-TQF User's Manual
2-6 Preparing to Power On
Next, you should check to make sure the peripheral drives and the SATA drives and
backplane have been properly installed and all connections have been made.
Checking the SATA drives
1. The SATA disk drives are accessable from the front of the server and can be
installed and removed from the front of the chassis without removing the top
chassis cover.
2. Depending upon your system's configuration, your system may have one or
more drives already installed. If you need to install SATA drives, please refer
to Chapter 6.
Checking the Airflow
1. Airflow is provided by six sets of 4-cm PWM fans (each set of fans consists
of two fans that are mounted back to back) and an air shroud. The system
component layout was carefully designed to direct sufficient cooling airflow to
the components that generate the most heat.
2. Note that all power and data cables have been routed in such a way that they
do not block the airflow generated by the fans.
Providing Power
1. Plug the power cords from the power supplies unit into a high-quality power
strip that offers protection from electrical noise and power surges.
2. It is recommended that you use an uninterruptible power supply (UPS).
3. Finally, depress the power on button on the front of the chassis.