Supero SUPERSERVER 1027TR-TF, Руководство пользователя

Страница: 28 / 130

Chapter 3: System Interface
3-1
Chapter 3
System Interface
3-1 Overview
There are several LEDs on the two control panels and on the hard drive carriers to
keep you constantly informed of the overall status of the system as well as the activ-
ity and health of specific components. There are also two buttons on each control
panel. This chapter explains the meanings of all LED indicators and the appropriate
response you may need to take. Note that the server has two control panels, one
for each serverboard installed in the system. This allows each serverboard to be
controlled independently of the other.
3-2 Control Panel Buttons
There are two push-buttons located on each control panel: a reset button and a
power on/off button.
UID
Depressing the UID (unit identifier) button illuminates an LED on both the front and
rear of the chassis for easy system location in large stack configurations. The LED
will remain on until the button is pushed a second time. Another UID button on the
rear of the chassis serves the same function. This button has an LED built into it,
which will illuminate when either the front or rear UID button is pushed.
Power
This is the main power button, which is used to apply or turn off the main system
power only to the serverboard it is connected to. Depressing this button removes
the main power but keeps standby power supplied to the serverboard.