Supero Supero X7SB4, Руководство пользователя

Страница: 16 / 130

1-10
X7SB4/X7SBE User’s Manual
1-3 Special Features
Recovery from AC Power Loss
BIOS provides a setting for you to determine how the system will respond when AC
Power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must hit the power switch to turn it back on)
or for it to automatically return to a power- on state. See the Power Lost Control
setting in the Advanced section to change this setting. ( Note : Default: Last State.)
1-4 PC Health Monitoring
This section describes the PC health monitoring features of the X7SB4/X7SBE.
All have an onboard System Hardware Monitor chip that supports PC health
monitoring.
Onboard Voltage Monitors for the CPU Cores, Memory Voltage,
+1.8V, +3.3V,
+
5V,
+
5V Standby,
+
12V,
−
12V and Vbatt.(via SuperO
Doctor)
An onboard voltage monitor will scan these voltages continuously. Once a
voltage becomes unstable, a warning is given or an error message is sent to the
screen. Users can adjust the voltage thresholds to defi ne the sensitivity of the
voltage monitor.
Fan Status Monitor with Firmware Control
The PC health monitor can check the RPM status of the cooling fans. The onboard
CPU and chassis fans are controlled by the Thermal Management via BIOS (under
Hardware Monitoring in the Advanced Setting).
Environmental Temperature Control
The thermal control sensor monitors the CPU temperature in real time and will turn
on the thermal control fan whenever the CPU temperature passes a user-defi ned
overheating threshold. The overheat circuitry runs independently from the CPU.
Once it detects that the CPU temperature is too high, it will automatically turn on
the thermal fan control to prevent the CPU from overheating. The onboard chassis
thermal circuitry can monitor the overall system temperature and alert users when
the chassis temperature is too high.