Supero Supero SUPERSERVER 5018A-MLTN4, Руководство пользователя

Страница: 69 / 120

Chapter 5: Advanced Motherboard Setup
5-19
USB Wake-Up Enable
Close pins 1/2 of jumper JPUSB1 to
"wake-up" the system by pressing a
key on the USB keyboard or by clicking
the USB mouse connected front acces-
sible USB 4/5 or USB6. JPUSB1 is in
conjunction with the USB Wake-Up
function in the BIOS. Enable both the
jumper and the BIOS setting to enable
this function. Default setting is Normal.
USB Wake_UP Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 USB Wake_up Enable
Pins 2-3 Normal
BIOS Recovery Enable
Close pins 1 and 2 of jumper JBR1 for
BIOS recovery. The default setting is
on pins 1 and 2 for normal operation.
See the table on the right for jumper
settings.
BIOS Recovery Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 BIOS Recovery
5-11 Onboard Indicators
LAN Port LEDs
The Ethernet ports each have two
LEDs. The yellow LED indicates activ-
ity when blinking while the other LED
may be green, amber or off to indicate
the speed of the connection. See the
table on the right for the functions as-
sociated with the connection speed
LED.
LAN LED
(Connection Speed Indicator)
LED Color Definition
Off No Connection or 10 Mb/s
Green 10 Gb/s
Amber 1 Gb/s
IPMI Dedicated LAN LEDs
The IPMI LAN port has two LEDs
as well. The amber LED on the right
indicates activity, while the green LED
on the left indicates the speed of the
connection. See the table at right for
more information.
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Color/State Definition
Link (Left) Green: Solid 100 Mbps
Activity
(Right)
Amber: Blink-
ing
Active
Activity LED
Link LED