Supero Supero SUPERSERVER 5018A-MLTN4, Руководство пользователя

Страница: 76 / 120

6-2
S
UPER
S
ERVER 5018A-MLTN4 User's Manual
Figure 6-2. Chassis Rear View
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the motherboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection.
The LEDs inform you of system status. See Chapter 3 for details on the LEDs and
the control panel buttons. Details on JF1 can be found in Chapter 5.
6-3 Removing the Chassis Cover
Removing the Chassis Cover
1. Power down the system and disconnect the power cord from the from the
rear of the power supply.
2. Place the chassis on a stable hard surface.
3. Remove the screws holding the chassis cover in place.
4. Apply pressure to the middle front of the chassis cover.
5. Slide the cover toward the rear of the chassis.
Figure 6-1. Chassis Front View
Power Supply I/O Ports
Control Panel