Supero Supero SUPERSERVER 5018A-MLTN4, Руководство пользователя

Страница: 64 / 120

5-14
SUPERSERVER 5018A-MLTN4 User's Manual
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located at
JSD1. Connect an appropriate cable
here to provide power support for your
Serial Link DOM devices.
DOM PWR
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
TPM/Port 80 Header
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See
the table on the right for pin definitions.
TPM/Port 80 Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
Overheat LED/Fan Fail
The JOH1 header is used to connect
an LED indicator to provide warnings
of chassis overheating and fan failure.
This LED will blink when a fan failure
occurs. Refer to the tables on right for
pin definitions.
Overheat LED
Pin Definitions
Pin# Definition
1 5vDC
2 OH Active
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Message
Off Normal
Solid Overheat
Blinking Fan Fail
LAN3/LAN4 LED Indication Header
Connect an appropriate cable to the
LAN3/4 LED indication header lo-
cated at JPK1 to indicate activity on
the LAN3/4 ports. (LAN1/LAN2 LED
indicator connections are located
on JF1.)