Supero SUPER P3TSSA, Руководство пользователя

Страница: 85 / 105

S
UPER P3TSSA/P3TSSR/P3TSSE User’s Manual
4-32
THRM Throttle Ratio
THRM throttling is used to lower power consumption and reduce heat. The
settings include "87.5%", "75.0%", "62.5%", "50%", "37.5%", "25%" and
"12.5%."
Intruder Sel
This option allows you to set the Intruder SEL setting to "SCI" or "SMI."
"SCI" is an acronym for "System Control Interrupt." This is considered to be
ACPI (Advanced Configuration and Power Interface) mode. The operating
system uses the SCI interrupt to process ACPI (Advanced Configuration
and Power Interface) events signaled by GPEs (General Purpose Event),
whether the system is asleep or awake when the event occurs. In other
words, the wake event has the side effect of causing the system to wake
up if it is asleep, but its primary purpose is to generate a SCI that notifies
the operating system that the event has occurred. "SMI" is an acronym for
"System Management Interrupt." This is considered to be Legacy mode. It is
used to log interrupt events to operating systems that do not support ACPI
(Advanced Configuration and Power Interface) and operating systems that
do.
Timer Overflow Enable
This allows the system to generate a System Management Interrupt after a
specific amount of time has passed. The settings for this option are "Dis-
abled" and "Enabled."
Thermal SMI Enable
This allows the system to generate a System Management Interrupt after a
specific temperature has been exceeded. The settings for this option are
"Disabled" and "Enabled."
PME SMI Enable
This allows the system to generate a System Management Interrupt after a
Power Management event has ocurred. The settings for this option are
"Disabled" and "Enabled."
SW SMI Timer Enable
The settings for this option are "Disabled" and "Enabled."