Supero SUPER P3TSSA, Руководство пользователя

Страница: 102 / 105

B-7
Appendix B: AMIBIOS POST Codes
Checkpoint Code Description
89h The programming after WINBIOS Setup has completed. Displaying
the power on screen message next.
8Bh The first screen message has been displayed. The <WAIT...>
message is displayed. Performing the PS/2 mouse check and
extended BIOS data area allocation check next.
8Ch Programming the WINBIOS Setup options next.
8Dh The WINBIOS Setup options are programmed. Resetting the hard
disk controller next.
8Fh The hard disk controller has been reset. Configuring the floppy
drive controller next.
91h The floppy drive controller has been configured. Configuring the
hard disk drive controller next.
95h Initializing the bus option ROMs from C800 next. See the last page
of this chapter for additional information.
96h Initializing before passing control to the adaptor ROM at C800.
97h Initialization before the C800 adaptor ROM gains control has
completed. The adaptor ROM check is next.
98h The adaptor ROM had control and has now returned control to
BIOS POST. Performing any required processing after the option
ROM returned control.
99h Any initialization required after the option ROM test has com-
pleted. Configuring the timer data area and printer base address
next.
9Ah Set the timer and printer base addresses. Setting the RS-232
base address next.