Supero SC835TQ-R800B, Руководство пользователя

Страница: 43 / 82

5-5
Chapter 5: Chassis Setup
Figure 5-4. Installing a Drive into a Hard Drive Carrier
Drive Carrier
SAS/SATA
Hard Drive
Use a hard, stable surface
when installing the hard
drive.
4
6
6
3. Place the hard drive carrier on a flat, stable surface such as a desk or work
bench.
4. Slide the hard drive into the carrier with the printed circuit board side facing down.
5. Carefully align the mounting holes in the hard drive and the carrier. Make sure
the bottom of the hard drive and bottom of the hard drive carrier are flush.
6. Secure the hard drive using all six screws.
7. Replace the drive carrier into the chassis. Make sure to close the drive carrier
using the drive carrier handle.