manualshive.com logo in svg

Supero SC835TQ-R800B, Руководство пользователя, Страница: 64 / 82

Поделиться
Скачать
Supero SC835TQ-R800B Скачать руководство пользователя страница 64

SC835 Chassis Manual

A-2

Description:

 This cable has one SFF-8484 (32 pin) connector on one end and 

4 SAS connectors (7 pins each) at the other. This cable connects from the Host 
(motherboard or other controller) to the backplane SAS hard drive port.

Cable Name:

 SAS Cable

Quantity: 

1

Part #: 

CBL-0175L

Alt. Name:

 "Big Four"

Description:

 This cable has one ipass (SFF-8087/mini-sas) connector (36 pins) 

at one end and 4 SAS connectors on one end. This cable connects from the Host 
(motherboard or other controller) to the backplane SAS hard drive port.

Cable Name:

 SAS Cable

Quantity: 

1

Part #: 

CBL-0116

Alt. Name:

 iPass or "Small Four"

A-3  Compatible Cables

This section lists cables included with the SC835 Chassis packages.

Alternate SAS Cables

Some compatible motherboards have different connectors. If your motherboard has 
only one SAS connector that the SAS cables must share, use one of the following 
cables. These cables must be purchased separately.

Содержание SC835TQ-R800B



















































































Отзывы:

Нет отзывов