Supero PDSMP-8, Руководство пользователя

Страница: 11 / 98

Chapter 1: Introduction
1-5
PDSMP-8/PDSMP-i Quick Reference
Jumpers Description Default Setting
J51/J52 SMB to PCI Slots Open/Open (Disabled)
JBT1 CMOS Clear See Section 2-7
JP17 Compact Flash Master/Slave On: Master (*Note 1)
JPA1 (*PDSMP-8 only) SCSI Channel Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 Giga-bit LAN 1/LAN 2 Enable Pins 1-2 (Enabled)
JWD Watch Dog Enable Pins 1-2 (Reset)
Connectors Description
ATX (J43) ATX 20-Pin Power Connector
9-Pin PWR (J15) 12V 9-pin Power Connector (Required)
COM1(J49), COM2(J13) COM Port Port 1 & Port 2 Connectors
DA1/DA2 SCSI Channel A /SCSI Channel B Activity LED
DIMM#1A,#2A,#1B,#2B Memory (DIMM) Slots (1 through 4)
Fans 1/2,3/4, 5/6 CPU/Chassis/System Fan Headers
FP Control (JF1) Front Panel Control Header
Floppy Connector(JFDD1) Floppy Disk Connector
JIDE1 IDE Hard Disk Drive Connector
JA1/JB1 (*PDSMP-8 only) SCSI Channel A (JA1)/SCSI Channel B (JB1)
JD1 Speaker (Pins 3/4:Internal, Pins 1-4:External.) (*Note 3)
JL1 Chassis Intrusion Header
JPB1 Universal Identifi cation Indicator (*See Chapter 2)
JPF1 Power Force-On
JSM1 4 SATA Headers
JWF1 PWR Supply to Compact Flash Card (*Note 1)
KB PS/2 Keyboard Connector
LAN1/LAN2 (JLAN1/2) Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors
LE 1 O5vsb warning LED Indicator (*Note 2)
MS Mouse Connector
SMbus System Management Bus
SPKR1 Internal Buzzer
USB0/1(JUSB1) Back Panel Universal Serial Ports 0/1
USB2/3(J48),USB4/5(J50) Front Panel Accessible USB headers 2,3,4,5
VGA (J7) VGA Connector
WOL(WOL) Wake On LAN header
WOR(JWOR) Wake On Ring header
( *Note 1: For JP17 (Compact Flash Card Master/Slave Select) to work properly, you
need to connect the Compact Flash Card PWR Cable to JWF1 fi rst.
Note 2 : If LE1 is on, turn off the PS before you install or remove components.)
Note 3 : For External Speaker use: Removal the jumper cap from JD1 and connect a
speaker cable to JD1.)