Supero P8SAA, Руководство пользователя

Страница: 59 / 90

Chapter 4: BIOS
4-9
.
4-4.4
PCI/PnP Configuration
Choose PCI/PnP Configurations from the Award BIOS main menu with the
Left/Right arrow keys. You should see the following display:
Initial Display From
This feature sets the device that will initiate the monitor display when the
system is first turned on. The options are PCI Slot and PCIEx(press).
Reset Configuration Data
Enabling this setting resets the extended system configuration data when
you exit setup. Do this when you have installed a new add-on and the
system reconfiguration has caused such a serious conflict that the OS
cannot reboot the system. The options are Enabled and Disabled .
Resources Controlled By
This setting allows the BIOS to automatically configure all boot and Plug and
Play compatible devices. If you choose Auto, you cannot select the IRQ,
DMA and memory base address fields, because the BIOS automatically
assigns them. The options are Auto (ESCD) and Manual.
Maximum Payload Size
This setting allows the BIOS to set the maximum TLP Payload size for the
PCI Express devices in the system. The options are: 128 (bytes), 256
(bytes), 512 (bytes), 1024 (bytes), 2048 (bytes), and 4 096 (bytes) .