Supero C7X58, Руководство пользователя

Страница: 82 / 101

4-16
X8SAX/C7X58 User’s Manual

PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following
items:
Clear NVRAM
This feature clears the NVRAM during system boot. The options are No and
Yes.
Plug & Play OS
Select Yes to allow the OS to configure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No to
allow the AMI BIOS to configure all devices in the system.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64 , 96, 128,
160, 192, 224 and 248.
PCIX Slot Frequency
Use this setting to change the clock frequency of the PCIX slot(s). The available
options are Auto , 33MHz PCI, 66MHz PCI, 66MHz PCI-X M1, 100MHz PCI-X
M1, and 133MHz PCI-X M1.
PXH IOAPIC Function (X8SAX only)
Disable this setting for Windows Vista and Windows 2008. This is provided to
optimize compatibility. The options are Disabled and Enabled.
PCI IDE Bus Master
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE
drives. The options are Disabled and Enabled .
PCI Slot 1 ~ PCI Slot 6
Use this setting to disable any of the PCI slots. The options are Disabled and
Enabled .
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
This feature is to enable LAN OPROM for PXE. This is to boot computers using
a network interface. The options are Disabled and Enabled.