Supero C7X58, Руководство пользователя

Страница: 79 / 101

Chapter 4: AMI BIOS
4-13

IDE / Floppy Configuration
When this submenu is selected, the AMI BIOS automatically detects the
presence of the IDE Devices and displays the following items:
Floppy A
This feature allows the user to select the type of floppy drive connected to the sys -
tem. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3 1/2", 1.44MB
3 1/2" and 2.88MB 3 1/2".
SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while
selecting Enhanced sets SATA#1 to native SATA mode. The options are
Disabled, Compatible, Enhanced
Configure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI.
ICH RAID CodeBase (Available if RAID is selected above)
Select Intel to enable the Intel Host RAID Utility. Select Adaptec to use the Adaptec
HostRAID Utility. The options are
Intel and Adaptec.
SATA#2 Configuration
Selecting Enhanced will set SATA#2 to native SATA mode. The options are
Disabled, Enhanced
IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI
devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and
35 .
AHCI CD/DVD Boot Timeout
Use this feature to set the time-out value for the BIOS to detect the AHCI CD/DVD
boot devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25,
30, and
35 .
Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,
and fourth IDE Master
These settings allow the user to set the parameters of Primary IDE Master/Slave,
Secondary IDE Master/Slave, Third and Fourth IDE Master slots. Hit <Enter> to