Supero C7X58, Руководство пользователя

Страница: 29 / 101

Chapter 2: Installation
2-7
Unplug the power cord from the 1.
power supply.
Using a screwdriver, loosen and 2.
remove the heatsink screws
from the motherboard in the se-
quence as shown in the picture
on the right.
Hold the heatsink as shown and 3.
gently loosen it from the CPU
by moving it from side to side.
(Do not use excessive force)
Once it is loosened, remove the 4.
heatsink from the CPU socket.
To reinstall the CPU and the 5.
heatsink, clean the surface of
the CPU and the heatsink to
remove the old thermal grease.
Reapply the proper amount of
thermal grease on the surface
before reinstalling them on the
motherboard.
Using a screwdriver to
remove Screw#1
Remove Screw#2
Passive Heatsink Removal
Screw in two diagonal screws 5.
(i.e., the #1 and the #2 screws)
until secure. However, leave
each loosely tightened until all
four screws are in place.
Finish the installation by fully 6.
tightening all four screws. Do
not over-tighten to avoid pos-
sible damage to the CPU.
Screw#1
Screw#2