Supero 2122TC-DL6RF4, Руководство пользователя

Страница: 3 / 118

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Server 2122TC-DL6RF4.
Installation and maintainance should be performed by experienced technicians only.
The A+ Server 2122TC-DL6RF4 is a high-end server based on the SC217HD-R1K28BP
2U rackmount chassis and the H8DCT-HLN4F dual processor serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the H8DCT-HLN4F serverboard
and the SC217HD-R1K28BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ Server 2122TC-DL6RF4
into a rack and check out the server configuration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing .
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the H8DCT-HLN4F serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfiguring the serverboard.
Chapter 6: Advanced Chassis Setup
Refer to Chapter 6 for detailed information on the SC217HD-R1K28BP server
chassis. You should follow the procedures given in this chapter when installing,
removing or reconfiguring SAS/SATA or peripheral drives and when replacing
system power supply units and cooling fans.