Supero 2022TC-BIBQRF, Руководство пользователя, Страница: 90 / 121

6-12
A+ SERVER 2022TC-BIBQRF/BTRF USER'S MANUAL
6-8 Expansion Card Setup
The SC827 chassis includes I/O slots for expansion cards. Each drawer supports
one low profile, half length expansion card for a total of four per chassis.
The node drawer only accepts expansion cards up to 5.9” (149.86 mm) in length.
Installing Expansion Cards
1. Disconnect the power supply, pull the node drawer from the chassis and lay
the drawer on a flat surface.
2. Pull open the expansion card slot clip in the rear of the drawer.
3. Slide the temporary PCI slot shield toward the slot clip and remove the
temporary shield from the chassis (see Figure 6-13).
PCI Slot Shield
Expansion Card Slot Clip
Figure 6-13. I/O Shield Placement