Supero 2022TC-BIBQRF, Руководство пользователя

Страница: 57 / 121

Chapter 5: Advanced Motherboard Setup
5-7
Installing a Passive CPU Heatsink
To install the SNK-0022+ Passive Heatsink, use the following procedure:
Note: Do not apply any thermal grease to the heatsink. The required amount has
already been applied.
Note : Make sure the heatsink is placed so that the fins of the heatsink are in the
direction of the airflow in your system.
Installing a Passive Heatsink
1. With the motherboard drawer out of the chassis and no power connected,
place the heatsink on top of the CPU so that the four mounting holes are
aligned with those on the (preinstalled) heatsink retention mechanism.
2. Screw in two opposite screws until they are just snug--do not fully tighten
them yet.
3. Add the two remaining screws, then finish the installation by fully tightening all
four screws.
Removing the Heatsink
Caution: We do not recommend removing the CPU or the heatsink. If you do need
to remove the heatsink, please follow the instructions below to prevent damage to
the CPU or other components.
Removing a Passive Heatsink
1. With the motherboard drawer out of the chassis and no power connected,
loosen all screws from the mounting holes.
2. Loosen all fasteners from the mounting holes.
3. Remove the heatsink from the CPU.