Supero 2022TC-BIBQRF, Руководство пользователя, Страница: 59 / 121

Chapter 5: Advanced Motherboard Setup
5-9
Memory Population for Optimal Performance
-For a Motherboard with One CPU (CPU1) Installed
# DIMMS CPU Channel 1 Channel 2
2 DIMMs CPU1 P1-1A P1-2A
4 DIMMs CPU1 P1-1A P1-1C P1-2A P1-2C
6 DIMMs CPU1 P1-1A P1-1B P1-1C P1-2A P1-2B P1-2C
Memory Population for Optimal Performance
-For a Motherboard with Two CPUs (CPU1 & CPU2) Installed
# DIMMS CPU Channel 1 Channel 2
4 DIMMs
CPU1 P1-1A P1-2A
CPU2 P2-1A P2-2A
8 DIMMs
CPU1 P1-1A P1-1C P1-2A P1-2C
CPU2 P2-1A P2-1C P2-2A P2-2C
12 DIMMs
CPU1 P1-1A P1-1B P1-1C P1-2A P1-2B P1-2C
CPU2 P2-1A P2-1B P2-1C P2-2A P2-2B P2-2C
To Install: Insert
module vertically and
press down until it
snaps into place.
Pay attention to the
alignment notch at
the bottom.
To Remove: Use
your thumbs to gently
push the release tabs
near both ends of the
module. This should
release it from the
slot.
Top View of DDR3 Slot
Release Tab Release Tab
Note: Notch should align with
the receptive key point on
the slot.
Notch Notch
Front View
Figure 5-3. Installing DIMM into Slot