Supero 1022GG-TF, Руководство пользователя

Страница: 57 / 122

Chapter 5: Advanced Serverboard Setup
5-7
Figure 5-4. DIMM Installation
To Install: Insert module
vertically and press down
until it snaps into place. Pay
attention to the alignment
notch at the bottom.
To Remove: Use your
thumbs to gently push the
release tabs near both ends
of the module. This should
release it from the slot.
Top View of DDR3 Slot
Release Tab Release Tab
Note: Notch should
align with the receptive
key point on the slot.
Notch Notch
Front View
Memory Population for Optimal Performance
-For a Motherboard with One CPU (CPU1) Installed
# DIMMS CPU Channel 1 Channel 2 Channel 3 Channel 4
4 DIMMs CPU1 P1-1A P1-2A P1-3A P1-4A
8 DIMMs CPU1 P1-1A P1-1B P1-2A P1-2B P1-3A P1-3B P1-4A P1-4B
Memory Population for Optimal Performance
-For a Motherboard with Two CPUs (CPU1 & CPU2) Installed
# DIMMS CPU Channel 1 Channel 2 Channel 3 Channel 4
8 DIMMs
CPU1 P1-1A P1-2A P1-3A P1-4A
CPU2 P2-1A P2-2A P2-3A P2-4A
16 DIMMs
CPU1 P1-1A P1-1B P1-2A P1-2B P1-3A P1-3B P1-4A P1-4B
CPU2 P2-1A P2-1B P2-2A P2-2B P2-3A P2-3B P2-4A P2-4B