manualshive.com logo in svg

Supero 1022GG-TF, Руководство пользователя, Страница: 13 / 122

Поделиться
Скачать
Supero 1022GG-TF Скачать руководство пользователя страница 13

Chapter 1: Introduction

1-5

1-3  Server Chassis Features

Drives

The SC818G chassis includes three 3.5" drive bays, that can accomodate 
hot-swappable SATA drives. 

System Power

The  SC818G  features  a  Gold  Level  1400  W  high-efficiency  power  supply.  See 

Chapter 6 for details.

Front Control Panel

The control panel provides a system monitoring and control interface. LEDs indicate 
system power, HDD activity, network activity, system overheat and power supply 
failure. A main power button and a system reset button are also included.

Cooling System

The SC818G has an innovative cooling design that includes eight 4-cm counter-
rotating PWM (Pulse Width Modulated) fans. Four are located in the middle section 
of the chassis, and two on each side for expansion cards. The power supply module 
also includes a cooling fan. All chassis and power supply fans operate continuously. 

An  air  shroud  channels  the  airflow  from  the  system  fans  to  efficiently  cool  the 

processors and memory. 

Содержание 1022GG-TF



























































































































Отзывы:

Нет отзывов