The newest generation of the M99 MINI PRO-25 can be set to be manually swit-
chable with the high beam switch. This function is intended for e-bikes like the
Specialized Turbo Levo that constantly supply the light port with power when the
bike is switched on. The following description shows how this manual mode can
be activated.
How to operate in the programming mode:
1. To enter the programming mode, hold down the high beam switch while swit-
ching on the E-Bike. After approx. 3 seconds the low beam flashes 3 times. Now
release the high beam switch.
2. Now you can switch between the following modes by briefly pressing the high
beam switch:
Manual mode (indicated by switched off light in programming mode): In this
mode, the front light is switched on after having started the E-Bike by briefly
pressing the high beam switch. It can be switched off by holding the switch
for 2 seconds or by switching off the E-Bike.
The automatic mode is set by default (indicated by pulsating light in pro-
gramming mode): If this mode is selected, the front light switches on auto-
matically when voltage is applied.
3. To exit the programming mode, disconnect the front light from the power supply.
With a
Specialized Turbo Levo you simply switch off the E-Bike. At the next start,
the last selected mode is activated.
Please note!
Never drive in programming mode (indicated by pulsating light), as the light is
not StVZO-compliant and you switch off the front light by pressing the high beam
switch.
NEW!
MANUAL SWITCHING FUNCTION FOR
M99 MINI PRO-25 CAN NOW BE ACTIVATED
A
B
EN
