Supermicro X6DH8-G2, Руководство пользователя

Страница: 27 / 104

Chapter 2: Installation
2-7
To Remove: Use your thumbs to gently push near the edge of
both ends of the module. This should release it from the slot.
2-4 I/OPorts/Control Panel Connectors
The I/O ports are color coded in conformance with the PC 99 specification.
See Figure 2-3 below for the colors and locations of the various I/O ports.
Figure 2-3. I/O Port Locations and Definitions
Top View of DDRII Slot
Video
Figure 2-2. Installing and Removing DIMMs
To Install: Insert module vertically and press down until it snaps
into place. Pay attention to the alignment notch at the bottom.
Note: Notch
should align
with the
receptive point
on the slot
Notch
Notch
Release
Tab
Release
Tab
DIMMII