X11SSL-CF/-nF User Manual
90
The options for Serial Port 1 are
Use
Automatic Settings
, (IO=3F8h; IRQ=4; DMA),
(IO=3F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12;
DMA), (IO=3E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), and (IO=2E8h; IRQ=3, 4, 5, 7, 9,
10, 11, 12; DMA).
Serial Port 2
Serial Port 2 Configuration
This submenu allows the user the configure settings of Serial Port 2.
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are
Enabled
and
Disabled.
Logical Device Settings
This feature displays the current status of a serial part specified by the user.
Serial Port 2 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are
Use
Automatic Settings
, (IO=2F8h; IRQ=3; DMA),
(IO=3F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12;
DMA), (IO=3E8h; IRQ=3, 4, 5,7, 9, 10, 11, 12; DMA), and (IO=2E8h; IRQ=3, 4, 5, 7, 9,
10, 11, 12; DMA).
Serial Port 2 Attribute
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are
SOL
and
COM.
Intel Server Platform Services
Intel Server Platform Services Configuration
The following items will display as detected by the BIOS:
•
ME BIOS Interface Version
•
SPS Version
•
ME FW (Firmware) Status Value
•
ME FW (Firmware) State
•
ME FW (Firmware) Operation State
