X11SSL-CF/-nF User Manual
82
Primary PCIE (PCI-Express Graphics)
This feature allows the user to specify which graphics card to be used as the primary
graphics device. The options are
Onboard
, PCH SLOT4 PCI-E 3.0 x1, and PCH SLOT5
PCI-E 3.0 x4(IN X8).
DMI/OPI Configuration
The following DMI information will display:
•
DMI
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled
.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are
Enabled
and Disabled.
CPU DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and
L1
.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and
Disabled
.
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6dB and
-3.5dB
.
PEG Port Configuration
CPU SLOT6 PCI-E 3.0 X8(IN x16)
SLOT6 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT6.
The options are
Auto
, Gen1, Gen2, and Gen3.
SLOT6 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are
Auto
, 128
TLP, and 256 TLP.
