13
Chapter 1: Introduction
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
Clear CMOS
See Chapter 2
JI2C1/JI2C2
SMB to PCI Slots
Pins 2-3 (Disabled)
JPB1
BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/LAN2 Enable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode Select
Pins 1-2 (Normal)
JPS1
SAS Enable
Pins 1-2 (Enabled)
JWD1
Watch Dog Enable
Pins 1-2 (Reset)
LED
Description
Status
LE1
Rear UID LED
Blue: On; Unit Identified
LEDBMC
BMC Heartbeat LED
Green: Blinking; BMC Normal
LEDPWR
System Power LED
Green: Solid On
LEDS1
SAS LED
Green Blinking; SAS Active
Red; SAS Error
Connector
Description
BT1
Onboard Battery
COM1/COM2
COM1/COM2 Port Headers
Fan1-Fan4, FanA
System/CPU Fan Headers
IPMI_LAN
Dedicated IPMI Gigabit (RJ45) Port
I-SATA0-I-SATA5
SATA 3.0 Connectors via Intel PCH (6Gb/s)
I-SGPIO 1/2
Serial_Link General Purpose I/O Connection Headers for I-SATA 3.0 connections
JD1
Speaker/Power LED Indicator
JF1
Front Panel Control Header
JIPMB1
4-pin External BMC I2C Header (for an IPMI Card)
JL1
Chassis Intrusion Header
JNVME1
Two (2) NVMe SSD Ports (X11SSL-nF Only)
JOH1
Overheat LED Indicator
JPI2C1
Power I2C System Management Bus (Power SMB) Header
JPWR1
24-pin ATX Main Power Connector (Required)
JPWR2
+12V 8-pin CPU Power Connector (Required)
JSAS1
Two (2) Mini-SAS HD Ports (X11SSL-CF Only)
JSD1/JSD2
SATA Disk On Module (DOM) Power Connectors
JSTBY1
Wake-On-LAN Enable Header
JTPM1
Trusted Platform Module/Port 80 Connector
