X11SSL-CF/-nF User Manual
86
Port 9
Detect Non-Compliance Device
If this feature is set to Enabled, the AMI BIOS will automatically detect a PCI-E device
installed on the port specified that is not compliant with the PCI-E standards. The options
are
Disabled
and Enabled.
PCI Express Configuration
Port 61h Bit-4 Emulation
Select Enabled to enable the emulation of Port 61h bit-4 toggling in SMM (System
Management Mode). The options are Disabled and
Enabled
.
PCIe PLL SSC
Select Enabled to enable Phase Locked Loop (PLL) support on the Spread Spectrum Clock
(SSC) settings to help reduce Electromagnetic Interference caused by the components in
the system. Select Disabled to enhance system stability. The options are
Disabled
and
Enabled
SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller(s)
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chip. The options are
Enabled
and Disabled.
SATA Mode Selection
Use this feature to select the mode for the installed SATA drives. The options are
AHCI
and
RAID.
SATA Frozen
Use this feature to enable the HDD Security Frozen Mode. The options are
Disabled
and
Enabled.
*If the item above "
SATA Mode Selection
" is set to AHCI, the following items will display:
Serial ATA Port 0~ Port 5
This feature displays the information detected on the installed SATA drive on a SATA port
specified by the user.
Port 0 ~ Port 5 Software Preserve
The status of software preserve of a SATA port will display as it is detected by the BIOS.
