Supermicro X11DGO-T, Руководство пользователя

Страница: 32 / 213

32
Super X11DGO-T User's Manual
Memory Support
The motherboard supports up to 6TB of 3DS Load Reduced DIMM (3DS LRDIMM), Load
Reduced DIMM (LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM (RDIMM)
DDR4 (288-pin) ECC 2933*/2666/2400/2133 MHz memory modules in 24 slots. Based on the
DCPMM population table on page 37, up to 6TB DCPMM memory is supported (2nd Gen
Intel Xeon Scalable-SP processors only). Populating the DIMM slots with memory modules of
the same type, speed and size will result in interleaved memory, which improves performance.
Note: 1. Support for 2933 MHz memory is dependent on the CPU SKU. 2. 16Gb-based
memory modules are supported by 2nd Gen Intel Xeon Scalable-SP processors only.
Memory Installation Sequence
Memory modules for this motherboard are populated using the "Fill First" method. The blue
memory slot of each channel is considered the "
fi rst DIMM module" of the channel, and the
black slot, the second module of the channel. When installing memory modules, be sure to
populate the blue memory slots
fi rst and then populate the black slots. To maximize memory
capacity, please populate all DIMM slots on the motherboard, including all blue slots and
black slots.
General Memory Population Requirements
1. Be sure to use the memory modules of the same type and speed on the motherboard.
Mixing of memory modules of different types and speeds is not allowed.
2. Using unbalanced memory topology such as populating two DIMMs in one channel while
populating one DIMM in another channel on the same motherboard will result in reduced
memory performance.
3. Populating memory slots with a pair of DIMM modules of the same type and size will
result in interleaved memory, which will improve memory performance.
2.4 Memory Support and Installation
Notes : Check the Supermicro website for recommended memory modules. Exercise
extreme care when installing or removing DIMM modules to prevent any damage.