Supermicro X11DGO-T, Руководство пользователя

Страница: 13 / 213

13
Chapter 1: Introduction
Motherboard Features
CPU
•
This motherboard supports dual Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP (Socket P) processors
which offer three Intel
® UltraPath Interconnects (UPI) links of up to 10.4 GT/s per processor
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on Page 15 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 6TB of 3DS Load Reduced DIMM (3DS LRDIMM), Load Reduced DIMM
(LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM (RDIMM), Non-Volatile DIMM (NV-DIMM) DDR4
(288-pin) ECC memory 2933*/2666/2400/2133 MHz modules in 24 slots.
Note : 1. Support for 2933 MHz memory is dependent on the CPU SKU. 2. Up to 6TB DCPMM memory is supported
(2nd Gen Intel Xeon Scalable-SP processors only).
DIMM Size
•
Up to 128 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard .
Chipset
•
Intel C621 chipset
Expansion Slots
•
One (1) PCI-E 3.0 x16 slot supported by CPU1 (JPCIE1: CPU1 Slot1)
•
One (1) PCI-E 3.0 x16 slot supported by CPU2 (JPCIE2: CPU2 Slo2)
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One (1) Dedicated IPMI LAN located on the rear IO back panel
Graphics
•
Graphics controller via ASPEED AST 2500 BMC (BaseBoard Management Controller)
Network Connection
•
Intel X540 LAN controller supports dual 10 GbE (10 Gigabit) LAN ports
•
Dual-Channel LAN controller for LAN 1/LAN 2 ports
I/O Devices
•
Serial (COM) Header
•
One (1) Fast UART 16550 header for front access
•
SATA 3.0
•
Eight (8) SATA 3.0 ports supported by Intel PCH (I-SATA 0-3, I-SATA 4-7)
(JSATA1)
•
RAID (PCH)
•
RAID 0, 1, 5, and 10
Motherboard Features