Supermicro X10SDD-F, Руководство пользователя

Страница: 35 / 91

35
Chapter 2: Installation
CPU
LED2
KVM
IPMI_LAN
JPG1
SW1
JUIDB1
LED1
JI2C2
JI2C1
JIPMB1
JMD4
JP2
JPME2
JPME1
JWD1
JTPM1
USB2 (3.0)
JMD3 JMD2
JMD1
JBT1
J5
S-SGPIO1
BT1
S-SA
TA/SAS0 S-SA
TA/SAS1
X10SDD-F
Rev. 1.01
LEDM1
BAR
CODE
MA
C
CODE
BMC
JPCIE1
MICRO-LP
JPCIE2
DIMMB2 DIMMB1 DIMMA2 DIMMA1
VGA Enable/Disable
Jumper JPG1 allows the user to enable the onboard VGA connector. Refer to the table below
for jumper settings.The default setting is Enabled.
VGA Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
1
1. VGA Enable/Disable
2. CMOS Clear
2
CMOS Clear
JBT1 is used to clear the CMOS. Instead of pins, this "jumper" consists of contact pads to
prevent accidental clearing of the CMOS. To clear the CMOS, use a metal object such as a
small screwdriver to touch both pads at the same time to short the connection.
Note: Be sure to completely shut down the system, and then short JBT1 to clear the
CMOS.