Supermicro X10SDD-F, Руководство пользователя

Страница: 23 / 91

23
Chapter 2: Installation
CPU
LED2
KVM
IPMI_LAN
JPG1
SW1
JUIDB1
LED1
JI2C2
JI2C1
JIPMB1
JMD4
JP2
JPME2
JPME1
JWD1
JTPM1
USB2 (3.0)
JMD3 JMD2
JMD1
JBT1
J5
S-SGPIO1
BT1
S-SA
TA/SAS0 S-SA
TA/SAS1
X10SDD-F
Rev. 1.01
LEDM1
BAR
CODE
MA
C
CODE
BMC
JPCIE1
MICRO-LP
JPCIE2
DIMMB2
DIMMB1 DIMMA2
DIMMA1
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMA1, DIMMB1, then DIMMA2,
DIMMB2. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.