Supermicro X10SDD-F, Руководство пользователя

Страница: 19 / 91

19
Chapter 2: Installation
CPU
LED2
KVM
IPMI_LAN
JPG1
SW1
JUIDB1
LED1
JI2C2
JI2C1
JIPMB1
JMD4
JP2
JPME2
JPME1
JWD1
JTPM1
USB2 (3.0)
JMD3 JMD2
JMD1
JBT1
J5
S-SGPIO1
BT1
S-SA
TA/SAS0 S-SA
TA/SAS1
X10SDD-F
Rev. 1.01
LEDM1
BAR
CODE
MA
C
CODE
BMC
JPCIE1
MICRO-LP
JPCIE2
DIMMB2 DIMMB1 DIMMA2
DIMMA1
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly. Then use a screwdriver to secure the
motherboard onto the motherboard tray.
Location of Mounting Holes
Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Philips
Screwdriver
(1)
Standoffs (7)
Only if Needed
Philips Screws
(7)
Tools Needed