Supermicro X10SDD-F, Руководство пользователя

Страница: 12 / 91

12
X10SDD-F User Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
•
Intel® Xeon® D, Pentium processor in a System-on-a-Chip (SoC).
Memory
Four (4) 288-pin DIMM slots support up to:
•
128GB of ECC 2400/2133/1866/1600/1333MHz RDIMM memory.
•
64GB of ECC 2133/1866/1600/1333MHz UDIMM memory.
Note : 2400MHz is only supported when using DDR4 RDIMM ECC memory, with both DIMMs populated (Both A1/
A2 or B1/B2).
DIMM Size
•
32GB, 16GB, 8GB, and 4GB, up to 128GB for RDIMM memory or up to 64GB for UDIMM memory at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Expansion Slots
•
One (1) Micro-LP PCI Express 3.0 x8 slot (CPU1 Slot1) (JPCIE1)
•
One (1) PCI Express 3.0 x8 slot (JPCIE2)
•
Two (2) M.2 M-key PCI Express 3.0 x 4 connectors (JMD1 & JMD2)
•
One (1) M.2 M-key PCI Express 2.0 x 4 connector (JMD3)
•
One (1) M.2 M-key PCI Express 2.0 x 2 connector (JMD4)
Network
•
One (1) IPMI 2.0 dedicated LAN located on the rear I/O panel
BaseBoard Management Controller (BMC)
•
ASpeed AST 2400 Baseboard Controller (BMC) supports IPMI 2.0
Graphics
•
Graphics controller via ASpeed AST2400 BMC
I/O Devices
•
Serial (COM) Port
•
One (1) serial port on the rear I/O panel (COM1) via KVM
•
SATA 3.0
•
Two (2) SATA 3.0 connectors to HDD via backplane; four (4) SATA 3.0 connectors
via M.2
•
SATA/SAS
•
SATA from add-on card (AOC) (S-SATA/SAS0 & S-SATA/SAS1)
Motherboard Features