manualshive.com logo in svg

Supermicro SuperWorkstation 5039A-IL, Руководство пользователя, Страница: 30 / 112

Поделиться
Скачать
Supermicro SuperWorkstation 5039A-IL Скачать руководство пользователя страница 30

SuperWorkstation 5039A-IL User's Manual

30

Figure 3-14. Installing a 2.5" Hard Drive from a Drive Carrier

8

7

4

5

Thumb Screw

4. Slide the 2.5" hard drive cage out of the chassis.

5. If a hard drive is already present, remove it by carefully pulling the sides of the hard 

drive carrier outward.

6. Remove the hard drive from the hard drive carrier.

7. Insert the new hard drive into the hard drive carrier. 

8. Insert the hard drive carrier into the hard drive cage, sliding it towards the back of the 

the hard drive cage until it clicks into a locked position.

Note: 

Enterprise level hard disk drives are recommended for use in Supermicro chassis and 

servers. For information on recommended HDDs, visit the Supermicro website at 

http://www.

supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf

Содержание SuperWorkstation 5039A-IL

















































































































Отзывы:

Нет отзывов