Supermicro SuperWorkstation 5038A-I, Руководство пользователя

Страница: 58 / 84

S
uper
W
orkstation 5038A-I User's Manual
BIOS
7-21 7-20
Memory Coniguration
Set Throttling Mode
Use this feature to activate Closed Loop Thermal Throttling (CLTT), which uses
the DIMM memory temperature as input to make adjustments to the throttling
based on variations in system's fan speed. The options are Disabled, and CLTT .
Socket Interleave Below 4GB
Select Enabled for the memory above the 4G Address space to be split between
two sockets. The options are Enable and Disable .
A7 Mode
Select Enabled to support the A7 (Addressing) mode to improve memory per-
formance. The options are Enable and Disable.
7-7 Hardware Monitor
This section is supported on the X10SRA motherboard only, or in the case of the
X10SRA-F, will only appear if jumper JPB1 is set to disabled (pins 2-3).
Temperature
The following temperatures from different sensors on the motherboard will be
displayed:
Enforce POR
Select Enable to enforce POR restrictions on DDR4 frequency and voltage
programming. The options are Enabled and Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, 2400, 2600, and 2667.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are Auto , Disabled and Enabled.
DRAM RAPL Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules. The
options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1 .